|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IPF04N03LA OptiMOS(R)2 Power-Transistor Features * Ideal for high-frequency dc/dc converters * N-channel * Logic level * Excellent gate charge x R DS(on) product (FOM) * Very low on-resistance R DS(on) * Superior thermal resistance * 175 C operating temperature * dv /dt rated Product Summary V DS R DS(on),max ID 25 4.1 50 V m A P-TO252-3-23 P-TO252-3-11 Type IPF04N03LA Package P-TO252-3-23 Ordering Code Q67042-S4197 Marking 04N03LA Maximum ratings, at T j=25 C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID T C=25 C1) T C=100 C Pulsed drain current Avalanche energy, single pulse Reverse diode dv /dt Gate source voltage3) Power dissipation Operating and storage temperature IEC climatic category; DIN IEC 68-1 I D,pulse E AS dv /dt V GS P tot T j, T stg T C=25 C T C=25 C2) I D=40 A, R GS=25 I D=50 A, V DS=20 V, di /dt =200 A/s, T j,max=175 C Value 50 50 350 890 6 20 115 -55 ... 175 55/175/56 mJ kV/s V W C Unit A Rev. 1.3 page 1 2003-12-19 IPF04N03LA Parameter Symbol Conditions min. Thermal characteristics Thermal resistance, junction - case SMD version, device on PCB R thJC R thJA minimal footprint 6 cm2 cooling area4) Electrical characteristics, at T j=25 C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS=0 V, I D=1 mA V GS(th) I DSS V DS=V GS, I D=80 A V DS=25 V, V GS=0 V, T j=25 C V DS=25 V, V GS=0 V, T j=125 C Gate-source leakage current Drain-source on-state resistance I GSS R DS(on) V GS=20 V, V DS=0 V V GS=4.5 V, I D=30 A V GS=10 V, I D=30 A Gate resistance Transconductance RG g fs |V DS|>2|I D|R DS(on)max, I D=30 A 25 1.2 1.6 0.1 2 1 A V 1.3 75 50 K/W Values typ. max. Unit 36 10 10 4.9 3.5 1.3 72 100 100 6 4.1 S nA m 1) Current is limited by bondwire; with an R thJC=1.3 K/W the chip is able to carry 131 A. See figure 3 T j,max=150 C and duty cycle D <0.25 for V GS<-5 V 2) 3) 4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 m thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.3 page 2 2003-12-19 IPF04N03LA Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics5) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Gate charge total, sync. FET Output charge Reverse Diode Diode continous forward current Diode pulse current Diode forward voltage IS I S,pulse V SD T C=25 C V GS=0 V, I F=50 A, T j=25 C V R=15 V, I F=I S, di F/dt =400 A/s 0.88 50 350 1.2 V A Q gs Q g(th) Q gd Q sw Qg V plateau Q g(sync) Q oss V DS=0.1 V, V GS=0 to 5 V V DD=15 V, V GS=0 V V DD=15 V, I D=25 A, V GS=0 to 5 V 12 6.4 9.0 15 33 3.0 28 37 16 8.6 13.5 21 44 38 49 V nC nC C iss C oss Crss t d(on) tr t d(off) tf V DD=15 V, V GS=10 V, I D=25 A, R G=2.7 V GS=0 V, V DS=15 V, f =1 MHz 4027 1703 236 13 7 40 7 5356 2265 355 20 11 60 11 ns pF Values typ. max. Unit Reverse recovery charge Q rr - - 15 nC 5) See figure 16 for gate charge parameter definition Rev. 1.3 page 3 2003-12-19 IPF04N03LA 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS10 V 140 60 120 50 100 40 P tot [W] 80 I D [A] 0 50 100 150 200 30 60 20 40 10 20 0 0 0 50 100 150 200 T C [C] T C [C] 3 Safe operation area I D=f(V DS); T C=25 C; D =0 parameter: t p 1000 1 s 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 10 limited by on-state resistance 10 s 100 s 1 0.5 100 0.2 DC 1 ms Z thJC [K/W] I D [A] 0.1 0.1 0.05 0.02 0.01 10 10 ms 0.01 single pulse 1 0.1 1 10 100 0.001 0 -6 10 10-5 0 10-4 0 -3 100 10 -2 0 10-10 10 0 1 V DS [V] t p [s] Rev. 1.3 page 4 2003-12-19 IPF04N03LA 5 Typ. output characteristics I D=f(V DS); T j=25 C parameter: V GS 120 10 V 4.5 V 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 C parameter: V GS 16 3V 2.8 V 3.2 V 3.4 V 3.6 V 3.8 V 14 100 4.1 V 12 80 10 8 6 4.5 V 60 3.5 V 40 3.2 V R DS(on) [m] 3.8 V I D [A] 4 20 3V 2.8 V 10 V 2 0 0 0 1 2 3 0 20 40 60 80 100 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 100 8 Typ. forward transconductance g fs=f(I D); T j=25 C 120 80 100 80 60 g fs [S] 40 20 175 C 25 C I D [A] 60 40 20 0 0 1 2 3 4 5 0 0 10 20 30 40 50 60 V GS [V] I D [A] Rev. 1.3 page 5 2003-12-19 IPF04N03LA 9 Drain-source on-state resistance R DS(on)=f(T j); I D=30 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS parameter: I D 8 7 2 6 800 A 2.5 R DS(on) [m] 5 4 98 % V GS(th) [V] 1.5 80 A typ 3 2 1 0.5 1 0 -60 -20 20 60 100 140 180 0 -60 -20 20 60 100 140 180 T j [C] T j [C] 11 Typ. Capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 10000 1000 25 C Ciss 175 C Coss 100 25 C, 98 % 175 C, 98 % C [pF] 1000 I F [A] 10 Crss 100 0 5 10 15 20 25 30 1 0 0.5 1 1.5 2 V DS [V] V SD [V] Rev. 1.3 page 6 2003-12-19 IPF04N03LA 13 Avalanche characteristics I AS=f(t AV); R GS=25 parameter: T j(start) 100 25 C 14 Typ. gate charge V GS=f(Q gate); I D=25 A pulsed parameter: V DD 12 15 V 10 150 C 100 C 5V 20 V 8 10 V GS [V] 1 10 100 1000 IAV [A] 6 4 2 1 0 0 20 40 60 80 t AV [s] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 29 V GS 28 27 26 Qg V BR(DSS) [V] 25 24 23 22 21 20 -60 -20 20 60 100 140 180 V g s(th) Q g (th) Q gs Q sw Q gd Q gate T j [C] Rev. 1.3 page 7 2003-12-19 IPF04N03LA Package Outline P-TO252-3-23: Outline Dimensions in inch [mm] Footprint Dimensions in mm Rev. 1.3 page 8 2003-12-19 IPF04N03LA Published by Infineon Technologies AG Bereich Kommunikation St.-Martin-Strae 53 D-81541 Munchen (c) Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts started herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies office in Germany or our Infineon Technologies representatives worldwide (see address list). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Infineon Technologies' components may only be used in life-support devices or systems with the expressed written approval of Infineon Technologies if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.3 page 9 2003-12-19 |
Price & Availability of IPF04N03LA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |